The steel wire rope twisting equipment consists of main components such as transmission device, twisting body, wire pressing tile device, traction device, safety parking device, winding and winding device, as well as a series of auxiliary machinery such as crane, welding machine, and cutting machine. The so-called twisting machine usually refers to its main parts, excluding auxiliary machinery. According to the structural type of the machine, there are several types of twisting machines, including basket type, tube type, and tubeless type. The wire rope twisting equipment consists of one or several tin cylinders. The spool is arranged in a straight line along the center of the body. When laying out, the spool is always horizontal.

The wire rope twisting equipment consists of one or several cylinders. The spool is arranged in a straight line along the center of the body. When laying out, the spool is always horizontal. The high-speed rotation of the cylinder, combined with the linear traction force generated by the traction device, causes the spiral wound steel wire and steel strand to move in a straight line, forming a steel strand with a certain twist distance, thereby completing the basic twisting action of the steel strand. Compared with the basket machine, the twisting principle is the same, but there is a significant improvement in the structure.

The steel wire rope twisting equipment has the advantages of small volume, small moment of inertia, fast running speed, low noise, smooth operation, and convenient operation. It is suitable for twisting most steel strands, especially wire contact steel strands and steel strands. By using some special devices, it is also possible to lay surface contact steel wire rope strands and irregular strands.

The speed of the wire rope twisting equipment is 400~5000 revolutions per minute. According to the number of cylinder sections and equipment power, a stranding machine can be composed of 6 to 36 I-shaped wheels, with up to 48 Z-shaped wheels and a length of 60 meters. The outer edge diameter of the tubular I-shaped wheel is 100 to 630 mm.